He and Hepta SystemsNew
PART NUM: 1652258
COMPANY: BIO-RAD

SOM CODE        MODEL           DESCRIPTION                                                                                                                                            CATALOGUE                      
D167/10 PDS­1000 PDS-1000/HEPTA SYSTEM GENE GUN WITH HEPTA ADAPTOR

SYS. INCLUDES HELIUM PRESSURE REGULATOR, SOLINOID,

SPACER ROD ETC

The PDS-1000/He system accelerates nucleic acid-coated gold or tungsten microparticles (0.6–1.6 µm) to velocities necessary to transfect cells, tissues, or organelles. The system uses a burst of high-pressure helium gas to accelerate a plastic macro carrier disk carrying microparticles toward target cells.

The helium pressure used to propel the microcarrier is determined by the choice of the rupture disk, a plastic seal designed to burst at a specific pressure. A stopping screen retains the macro carrier while allowing the microparticles to pass through and penetrate the target cells. To increase the efficiency of the process, the chamber may be evacuated to subatmospheric pressures, reducing the frictional drag on the microparticles as they travel toward the target cells

Key Features
→ A reproducible method for transforming intact cells in culture, requiring little manipulation of cells
→ Transformation of cells with unique growth requirements that are not amenable to other methods of transfection
→ Maximum control
→ High reproducibility

PDS-1000/He System with Hepta™ Adaptor
The Hepta adaptor for the PDS-1000/He biolistic system enables 7–10 times more cells to be transformed than the standard system. It fits into the shocking chamber of the PDS-1000/He system where it splits the helium shock wave over seven macrocarriers. By uniformly spreading the DNA-coated gold or tungsten particles over this larger area, the system maximizes the number of cells transformed during one bombardment. As the helium is split seven ways, pressure and particle velocities are reduced, making the system ideal for plants and cell cultures requiring less forceful penetration.

Specification :

Dimensions (W x D x H) 29 x 25.5 x 47.5 cm
Construction Aluminum, ABS plastic, and acrylic chassis
Weight 15 kg
Electrical input voltage 100–120 VAC, 50–60 Hz
Maximum current < 5 A
Mechanical
Fuse 6.3 A, 250 V, 5 x 20 mm
Vacuum < 0.4 inches mercury / min leakage
Overpressure 0.5 psi relief valve, self-resetting
Environmental
Operating Temperature 0–35°C (32–95°F)
Humidity 0–95% noncondensing
Storage Temperature 0–70°C (32–158°F)
Humidity 0–95% noncondensing

COMPANY:EISCO INDIA

SOM CODE        MODEL           DESCRIPTION                                                                                                                                            CATALOGUE                      
2252/5 PARTICLE MOVEMENT DEMO TUBE HEAT RESISTANT.

Note: Please mention the product “SOM CODE” while making a request for quotation and send it to *****@somatco.com