Freeze Dryer

FreeZone 4.5 Liter -50C Benchtop Freeze Dryer
COMPANY: LABCONCO USA

FreeZone 4.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space.

The upright stainless steel collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58° F), suitable for aqueous samples.

→ Collector Temperature: -50° C, -58° F
→ Conformance: CE
→ Ice Holding Capacity: 4.5L
→ Style: Benchtop
→ Vacuum Pump Displacement Required: 98 L/min or larger displacement

COMPANY : LABCONCO U.S.A.

FreeZone 2.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light sample loads. The compact design is ideal for labs with limited floor space.

The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration systems cool the collector to -84° C (-119° F), suitable for samples with low eutectic points including acetonitrile.

→ Collector Temperature: -84° C, -119° F
→ Ice Holding Capacity: 2.5L
→ Vacuum Pump Displacement Required: 98 L/min or larger displacement
→ Weight: 133.0 lbs
→ Weight metric: 60.3 kg
→ Dimensions: 14.5″ w x 24.5″ d x 16.9″ h
→ Dimensions metric: 36.8 w x 62.2 d x 42.9 h cm
→ Electrical: 230V, 60 Hz, 10A

COMPANY : LABCONCO, U.S.A..

Features a permanently-installed 10-port stainless steel drying chamber and stainless steel collector chamber and coil.

Product Specifications
Item Dimensions: 18.6″ w x 18.5″ d x 22.5″ h
Electrical Specification: 208/230 volts, 60 Hz, 2.5 A
Style: Benchtop
Collector Type: Stainless steel
Ice Holding Capacity: 4.5 L
Collector Temperature: -50°C, -58°F
Electrical Standard: Domestic
Built-In Options: 10-port Drying Chamber
Drying Accessory: 10-port, permanently installed
Compliance: UL 61010A-1, CAN/CSA C22.2 No. 1010.1
Vacuum Pump Required: 86 L/Min. or larger displacement

COMPANY : LABCONCO U.S.A.

FREEZONE 6LITER FREEZER DRY SYSTEM WITH STOPPERING TRAY DRYER AND TEFLON-COATED COLLECTRO, 208/230V/60HZ UK PLUG (6-PORT TRAT DRYER MANIFOLD 7726500)(VACUUM PUMP WITH FILTER EXHAUST 165 LITERS/MIN 7739403)

Features
→ 3/4 hp CFC-free refrigeration system;
→ red alarm light;
→ LED vacuum and temperature wave graphs;
→ patented moisture sensor;
→ vacuum control/break valve;
→ rear-mounted RS-232 port;
→ automatic start-up switch for collector cool-down and vacuum pull-down with manual override switches;
→ hot gas defrost and switch;
→ retractable collector drain line;
→ 3″ diameter port for connection of drying accessory;
→ power switch;
→ rear-mounted electrical receptacle for vacuum pump connection (pump not included);
→ 3/4″ OD vacuum connection;
→ 3/4″ ID

COMPANY : LABCONCO U.S.A.

Vacuum Stoppering Adapter connects to a valve port for manual stoppering of a 20 mm corkage serum bottle under original vacuum. The stopper and serum bottle are inserted into the adpter body and lyophilization begins. After the process is completed, the researcher slides the stopper into position so when the valve is turned from vacuum to vent the serum bottle is tightly sealed by the stopper. The ejector tube is then used to force the serum bottle out of the adapter.

Weight: 1.0 lbs
Weight metric: 0.5 kg
Applicable Products: Serum Bottles

FREEZE DRY FLASK
COMPANY : LABCONCO, U.S.A..

Select Fast-Freeze Flasks based on your sample sizes. Flasks should be filled to no more than one-third of their volume so that maximum surface area is achieved and efficient lyophilization is assured. A complete Fast-Freeze Flask includes a rubber top, glass bottom and a supply of filter paper. Tops, bottoms and filter paper are available separately as replacement components. Adapters are required to attach flasks to freeze dry valve ports.

ADAPTOR
COMPANY : LABCONCO, U.S.A..

Add the Adapters for connecting the Fast-Freeze Flasks to the valve ports on your drying chamber or manifold. Choose borosilicate glass or stainless steel adapters in 1/2″ and 3/4″ diameters.

LYPH-LOCK FLASK
COMPANY : LABCONCO, U.S.A

Select the Lyph-Lock Flasks based on your sample sizes. Flasks should be filled to no more than one-third of their volume so that maximum surface area is achieved and efficient lyophilization is ensured. A complete Lyph-Lock Flask includes a glass top and bottom and a rubber ring seal. Tops, bottoms and seals are available separately as replacement components. Adapters are required to attach flasks to freeze dry valve ports.

SOM CODE : D260/26
MODEL : 7573610
CAPACITY : 30MLCOMPANY : LABCONCO, U.S.A..
SERIUM BOTTLE

Perfect for long term storage of freeze dried samples. Labconco Serum Bottles and Threaded Vials are specifically designed for lyophilization applications. Their uniform thin wall construction ensures even freezing and drying. Bottles and vials are ideal containers for use in the FreeZone Stoppering Tray Dryer. Serum bottles also connect to valve ports on drying chambers and manifolds. Serum Bottles, Stoppers and Seals are supplied in packages of 100.

SOM CODE : 1300/120
MODEL : 7521001
COMPANY : LABCONCO U.S.A.

HEATED BULK DRYING CHAMBER 230v 50/60 Hz

Designed for use with FreeZone Freeze Dry Systems. Provide strength, durability and corrosion resistance. Chambers are available in regular, heated, and clear models.

Dimensions,dia. x H, cm (in.): 23 x 27 (9 x 10.5)

→ Weight: 2.0 lbs
→ Weight metric: 0.9 kg
→ Dimensions metric: 190mm high, 90.2mm dia.
→ Volume: 900 ml

SOM CODE : D54/154
MODEL : 7868500
COMPANY : LABCONCO, U.S.A..

Ampule Manifold 48-Port

AMPULE MANIFOLD 48-PORT 5 INCH x 5INCH x28.63 INCH HFOR LYOPHILIZING MULTIPLE QUANTITIES OF SMALL SAMPLES IN AMPULES STAINLESS STEEL TREE TYPE WITH 48 EACH 1/4INCH OD PIPE STEMS

Dimenssion : 28.6″ h x 5.0″ w x 5.0″ d (72.7 cm x 12.7 cm x 12.7 cm)
Weight : 5.4 KG

SOM CODE : 1300/127
MODEL : 7578500
COMPANY : LABCONCO U.S.A.

OXYGEN NATURAL GAS SEALING TORCH SPECIFICALLY DESINED FOR FLAME SEALING FREEZE DRY AMPULES SEALS ALL TYPES OF HEAT RESISTANT GAS CONNECTS TO NATURAL GAS BUTANE OR PROPANE AND OXYGEN WITH 1/4 ID HOSE CONNECTORS

Note : Please mention the product “SOM CODE” while making request for quotation and send it to *****@somatco.com