PH Meter

Water Quality Test Kit – Accurate and Reliable Water Quality Tests^New
COMPANY: HANNA ROMANIA

The Hanna HI3817 combination test kit offers all the necessary equipment for accurate and reliable water quality testing.

→ Alkalinity (as CaCO3) – 0-100 mg/L (ppm) | 0-300 mg/L (ppm)
→ Chloride – 0-100 mg/L (ppm) | 0-1000 mg/L (ppm)
→ Hardness (as CaCO3) – 0.0-30.0 mg/L (ppm) | 0-300 mg/L (ppm)
→ Iron – 0-5 mg/L (ppm)
→ electronic pH tester – 0.0-14.0 pH
→ Sulfite (as Na2SO3) – 0.0-20.0 mg/L (ppm) | 0-200 mg/L (ppm)

Water Quality Test Kit – Accurate and Reliable Water Quality Tests^New
COMPANY: HANNA ROMANIA

The Hanna HI3817 combination test kit offers all the necessary equipment for accurate and reliable water quality testing.

→ Alkalinity (as CaCO3) – 0-100 mg/L (ppm) | 0-300 mg/L (ppm)
→ Chloride – 0-100 mg/L (ppm) | 0-1000 mg/L (ppm)
→ Hardness (as CaCO3) – 0.0-30.0 mg/L (ppm) | 0-300 mg/L (ppm)
→ Iron – 0-5 mg/L (ppm)
→ electronic pH tester – 0.0-14.0 pH
→ Sulfite (as Na2SO3) – 0.0-20.0 mg/L (ppm) | 0-200 mg/L (ppm)

CLEAN PH500 pH / mV Meter
COMPANY : CLEAN INSTRUMENTS CHINA

Features
→ Easy-to-read LCD Display with high luminant backlight
→ Up to 3 points auto-buffer-recognition: Zero offset, Slope of Acid/Alkali segment, Ensure accurate measuring results for the full range with Calibrated pointed displayed
→ One key to check through all the settings, including: Zero offset, Slope of Acid/Alkali segment, and all the settings
→ 150 data sets memory stores and recalls
→ Auto Power off saves battery after 10-mins non-use
→ Detachable Electrode Stand organizes multiple electrodes neatly, easy installing at either left or right side and holds them firmly in place

pH/mV/DC Meter
COMPANY : HANNA ITALY

pHep+ Waterproof Pocket pH Tester with 0.01 pH Resolution – HI98108^New
COMPANY : HANNA ITALY

The HI98108 pHep+® pH tester provides high accuracy measurements in a rugged pocket-sized design. This meter features an exposed temperature sensor that will provide rapid automatic temperature compensated measurements. The simple two-button operation provides one button for ON/OFF, the other for calibration. Being lightweight and only 0.7″ thick, the pHep+ is extremely ergonomic and fits comfortably in your hand.

→ pH Range : 0.00 to 14.00 pH
→ pH Resolution : 0.01 pH
→ pH Accuracy : ±0.10 pH
→ Temperature Range : 0.0 to 50.0 oC (32.0 to 122.0 oF)
→ Temperature Resolution : 0.1 oC / 0.1 oF
→ Temperature Accuracy : ±0.5 oC / ±1.0 oF

Platinum ORP Half-Cell Electrode with BNC Connector – HI3133B
COMPANY: HANNA ROMANIA

The HI3133B is a glass body ORP half-cell electrode with a BNC connector. This sensing electrode is made with a platinum pin and is to be used in conjunction with a reference half-cell electrode. This design consideration is ideal for use in ORP titrations as well as for general purpose measurements.

→ Half-Cell Design
→ BNC Connection
→ Platinum Sensing Pin
→ Glass Body
→ BNC Connector
→ ORP Sensing Type Platinum
→ Body Material glass
→ Tip / Shape platinum pin
→ Temperature Operating Range -5 to 100°C (23 to 212°F)
→ Body Length/Overall Length 120 mm / 163.5 mm
→ Outer Diameter 12 mm
→ Cable coaxial
→ Connector Type BNC
→ Recommended Use general purpose, potentiometric titration

pH Tester / pH Electrode
COMPANY : HANNA ITALY

BENCHTOP pH METER
COMPANY : VWR,U.S.A.

Jenway 3520 pH/mV/Temperature Meter
COMPANY : JENWAY ENGLAND

→ 3 decimal place pH resolution
→ 3 point pH calibration
→ Choice of pH calibration buffer types
→ Differential pH input
→ Security code protected user data
→ Calibration data status display
→ Calibration reminder
→ 500 reading memory
→ Comprehensive data logging options
→ RS232 serial interface and IrDA printer interface
→ Alarm outputs (open collector and audible)
→ Analogue recorder output
→ Wall mounting option
→ Back lit 1/8 VGA monochrome liquid crystal display
→ Multi-language operation

SOM CODE : 1462/6
MODEL : 3080/3080HL, 3090/3090HL
COMPANY : JENWAY, ENGLAND.

pH METER
The industrial range of electrochemical instrument are supplied in either DIN standard sized steel panel mounting cases. Or wall mounted water resistant cases.

All of these units will measure pH over the range of 0 to 14pH with a switchable resolution of 0.1pH to 0.01pH.

The pH mode is automatically temperature compensated over the range of 0 to 1000C. A millivolt mode is also provided for the measurement of Redox potentials.

SOM CODE : D150/558
Model : KH-58600-00
COMPANY : COLEPARMER,U.S.A

COMPACT PORTABLE PH/MV/TEMP METER KIT

→ Use this compact meter as a handheld or benchtop unit—front cover folds down to form a stand for benchtop use
→ Error messages alert you to incorrect calibration procedures or faulty electrode
→ Use recorder output to make copies of pH, mV, and temperature readings

Easy-to-use meter provides the basic features you would expect with some added enhancements. Meter offers manual or automatic temperature compensation, dual display of pH/temperature or mV/temperature, and portable design with a long battery life. Calibrates quickly with up to two-point calibration and automatic buffer recognition. Diagnostic messages guide you through use, and the recorder output provides for easy data documentation.

pH CONTROLLER
COMPANY : HANNA, ITALY

ELECTRODES^New
COMPANY : VWR USA

→ Body Material : polypropylene
→ Reference : single, Ag/AgCl
→ Junction / Flow Rate : cloth
→ Electrolyte : gel
→ Range pH : 0 to 13, EC
→ Max Pressure : 0.1 bar
→ Tip Shape : spheric (8 mm)
→ Diameter : 16 mm
→ Body Length / Overall Length : 95 mm / 185 mm
→ Recommended Operating Temperature : 0 to 50°C (32 to 122°F) – LT
→ Temperature Sensor : yes
→ Matching Pin : no
→ Amplifier : yes
→ Digital : no
→ Cable : 7-pole; 1 m (3.3′)
→ Connection : DIN
→ Applications : boilers, cooling towers, environmental monitoring, greenhouses, hydroponics, water treatment

SOM CODE : 1462/144
MODEL : HI1144B
COMPANY : HANNA ROMANIA

STANDARD CALOMEL ELECTRODE REFERENCE SINGLE, HG/HG2CL2,JUNCTION/FLOW RATE CERAMIC, SINGLE /15-20 µL/H,ELECTROLYTE KCL 3.5M,MAX PRESSURE 0.1 BAR,RANGE PH: 0 TO 14,RECOMMENDED OPERATING TEMP.20 TO 40°C (68 TO 104°F),TIP/SHAPE SPHERIC (DIA: 9.5 MM)

Junction/Flow Rate : ceramic, single / 15-20 µL/h
Electrolyte : KCl 3.5M
Max Pressure : 0.1 bar
Range : pH: 0 to 14

pH Electrodes
COMPANY : HANNA ITALY

SOM CODE : 1462/242^New
MODEL : HI 76310
COMPANY : HANNA ITALY

PLATINUM 4 RING CONDUCTIVITY TDS PROBE WITH 1 METER 3.3 FEET CABLE

4-ring interchangeable platinum probe with built-in temperature sensor, ATC and 1 m (3.3′) cable, for use with HI 3512, HI 2300 and HI 2550.

The potentiometric method eliminates polarization and thus is the most accurate way to measure electrical conductivity in liquids. The probe can also measure in a wider conductivity range because it does not suffer from electrolysis. Models with stainless steel and platinum rings are available. The platinum probes are ideal for high temperature applications, are easier to clean and provide more stable readings.

General Purpose Glass Bodied pH Electrode
COMPANY : JENWAY,ENGLAND

This electrode is designed for standard measurements of general solutions. It is designed for general purpose pH measurement for accurate Q.C. and research work.

FLUORIDES STANDARD / TISAB SOLUTION(FLURIDES STANDARD SOLUTION) / CALIBRATION KIT
COMPANY : HANNA, ITALY

SOM CODE : D179/37
MODEL : HI38061
COMPANY : HANNA ITALY

COMPLETE KIT CASE FOR 38061

Phosphate test kit for irrigation water
The reaction between phosphate and the reagent causes a blue tint in the sample; adaptation of the ascorbic acid method.

Phosphates are widely introduced into the environment from such sources as agricultural fertilisers, cleaning and laundering products, boiler water conditioners and drinking water treatment aids. At high levels, phosphates stimulate the growth of photosynthetic organisms which may contribute to eutrophication of lakes, rivers and ponds. This makes it important to monitor and control phosphate discharges into the environment.

Note : Please mention the product “SOM CODE” while making request for quotation and send it to *****@somatco.com