1462/31_HI 991301

Description

DESCRIPTION

The HI1288 pre-amplified multiparameter probe features an easy-to-clean sensor and a cloth junction that can be renewed to increase the life of the probe. To ensure against interference from transient electrical noise, a solid-state amplifier is integrated into the HI1288.

Features

Easily fits in the palm of your hand
Amperometric conductivity probe
Built-in temperature sensor
The sensor is easy to clean and maintain
Multi parameter probe features a cloth junction that can be pulled longer, effectively increasing the life of the probe
Multi level LCD display
On-screen tutorial messages for calibration and setup
Automatic one or two-point- pH calibration
Battery % displayed on startup

Are you Making Errors when Measuring pH

Storing the Electrode Dry
Wiping the Sensing Glass
Storing the Electrode in DI Water
Not Cleaning the Electrode
Calibration Errors
Electrode Selection
Not Loosening or Removing the Fill Hole Cap
Electrolyte Selection
Inadequate Probe Submersion
Using an Old or Expired Electrode

Five Tips for Calibrating your pH Meter

Always Read your Manual
Make Sure you Have the Right pH Buffers
Calibrate Often
Be Aware of your Slope and Offset
Electrode Care

Hanna HI991301 Specifications

pH Range	0.00 to 14.00 pH
pH Resolution	0.01 pH
pH Accuracy	±0.01 pH
pH Calibration	Automatic, at one or two points with two sets of standard buffers (pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18)
Conductivity Range	0.00 to 20.00 mS/cm
Conductivity Resolution	0.01 mS/cm
Conductivity Accuracy	±2% F.S.
TDS Range	0.00 to 10.00 ppt (g/L)