1462/51_HI 93751

DESCRPTION

Description:

Sulfate is widely present in natural waters in different concentrations.

Sulfate concentration is to be kept within a strict range for drinking water, especially since the value can be high near mine drainage points.

Sulfate is also rigorously tested in the production of beverages such as beer, due to its significant effect upon odor and taste.

Sulfate is added to certain types of boilers to help precipitate calcium and magnesium and to inhibit encrustation.

On the other hand, too much sulfate can be corrosive in high pressure boilers, electric turbines and their heat exchangers.

In fact, in these applications it is important to keep the level below a specific limit.

Similar checks of sulfate presence are carried out in water used for different production cycles, including those of semiconductors.

HI 93751 measures the sulfate ion concentration using a turbidimetric method. The turbidity of the sample, after the addition of reagents, is

proportional to the strength of sulfate present.

Specifications:

Range		0 to 150 mg/L
Resolution		1 mg/L
Accuracy		±1 mg/L ±5% of reading
Light Source		LED 470 nm
Light Life		Life of the instrument
Light Detection		Silicon Photocell
Battery Type / Life		1 x 9V / approx. 40 hours of continuous use; auto-off after 10 minutes of non use
Environment		0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions		180 x 83 x 46 mm (7.1 x 3.3 x 1.8″)
Weight		290 g (10 oz.)
Method		Adaptation of the turbidimetric method. The reaction between sulfate and the reagent causes turbidity in the sample