D22/100_200 SERIES

D22/100_200 SERIES

Aeroquel Monitor

AEROQUAL SERIES 200 MONITOR INCLUDES ONE SENSOR HEAD FOR OZONE RANGES 0-0.5 PPM, LOW

SOM CODE:D22/100
MODEL :200 SERIES
COMPANY:AIR MONITORS, UK.

Description

DESCRIPTION

The Series 200 can be hand held or fixed in position. It is a simple, easy-to-use, low-cost monitor that only displays the gas concentration. The monitor is compatible with the full range of Aeroqual gas sensors and is thus capable of measuring ozone, volatile organic compounds (VOC’s), ammonia and carbon monoxide.

The Aeroqual Series 200 Monitor has been specifically designed to incorporate Aeroqual’s in-depth knowledge of accurate ambient gas measurement. Different sensor heads are used for specific gases or depending upon whether high or low concentrations are to be measured. All the sensor heads are interchangeable on the same base unit.

Features
• High accuracy measurement
• Easy to operate & maintain
• Portable battery operation
• Large easy read display
• Ergonomic design
• Rapid T90 response
• Remote sensor capability
• Interchangeable sensor heads
• Supplied with AC charger/adaptor

The monitor is modular in design and is comprised of two main components, a Series 200 monitor and a sensor head. This affords the user the ability to replace faulty sensor heads without having to replace the monitor. The monitor can be mains and/or battery powered and either permanently mounted or used as a portable unit.

The sensor head is calibrated prior to delivery and does not normally need to be re-calibrated during its life. (Specific user guides are supplied for the special operations of particular sensor heads).

The Aeroqual Series 200 Monitor comes with in-built diagnostics, which will inform the user if the sensor is not operating correctly.

An audible alarm is available with perchloroethylene sensors only. Both temporary and permanent mute functions are also included with the audible alarm.

Concentration unit selection. The concentration can be displayed in either ppm or mg/m3.

Min / max / average measurement cycle. The monitor will display the minimum, maximum, average and 15-minute average gas concentrations over the measurement period.

SPECIFICATIONS

Measurement units: ppm or mg/m3
Reading functions: Minimum | Maximum | Average | 15-min
Sensor head: Removable | Replaceable
Display type: LCD
Display status indicators: Battery | Sensor | Standby
Calibration feature: Zero-cal function
Power supply: 12 VDC (power adaptor/charger supplied)
Rechargeable battery: Ni-MH 9.6 VDC | 2100 mA/h

Enclosure material / rating: PC & ABS | IP20 & NEMA 1 equivalent
Size (with sensor head): 195 x 122 x 54 (mm)
Weight (with sensor head & battery): < 460 g

Technical Specification

Contact Us

+966-556111951 info@somatco.com

Visit Our Showroom

Find our Showroom/Branch Offices which is near to you

Reviews

There are no reviews yet.

Be the first to review “D22/100_200 SERIES”

Your email address will not be published. Required fields are marked *

Go to Top