COMPANY : COLE PARMER U.K.
| SOM CODE | MODEL | DESCRIPTION | CATALOGUE |
|---|---|---|---|
| 1894/9 | SC-200(36620-42 | SAMPLE CONCENTRATOR GAS RESERVOIR AND STAND FOR TUBES |
 |
Key Features
- Variable needle position suits various Dri-Block® inserts
- Small size makes it ideal for use under a fume hood
- Needles, block, and block heater sold separately
- For 0.2 mL microcentrifuge tubes to 26 mm tubes
- Three year warranty
- Previous part number FSC400D
Technical Specification
| Maximum gas pressure | Must not exceed 2 psi |
|---|---|
| Maximum vertical travel | 320mm |
| Maximum gas usage | 15 litres / minute |
| Gas | Any inert gas (often nitrogen) |
| Gas intake nozzle diameter | 6.35mm (1/4″) |
| Needle position | Variable to suit Techne Dri-Blocks |
| Dimensions L x W x H (mm) | 295 x 240 x 530 |
| Shipping weight (gas chamber and stand)² | 5kg |
COMPANY : TECHNE, U.K.
| SOM CODE | MODEL | DESCRIPTION | CATALOGUE |
|---|---|---|---|
| D221/2 | FSC400D | SAMPLE CONCENTRATOR GAS CHAMBER & STAND ONLY |
|
Fast evaporation of solvents from any sample vessel
→ The unit is light and compact enough for convenient use in a fume cupboard when toxic solvents are being evaporated.
→ The needles¹ are made from high quality stainless steel and are specially designed for use with the Techne Sample Concentrator. When corrosive solutions are being used, PTFE coated needles are available.
→ The Sample Concentrator’s gas reservoir is mounted on a fully adjustable stand for accurate height control.
The Techne Sample Concentrator accelerates the concentration of large numbers of samples in a matter of minutes, where traditional methods can take hours. It is ideal for the life science researcher and chemist alike designed for applications such as sample preparation, drug screening, hormone assays, chromatographic analysis and scintillation counting.
Unique gas chamber
Evaporation is increased by passing an inert gas over the surface of the sample to remove any evaporated solvent molecules, maintaining the concentration gradient. The gas travels through the unique patented gas chamber to the samples via the needles. The needles are inserted into a silicone matrix and can be spaced to fit varying combinations of tubes from 26mm tubes to 0.2ml microcentrifuge tubes.
Technical Specification
| Maximum gas pressure | Must not exceed 2 psi |
|---|---|
| Maximum vertical travel | 320mm |
| Maximum gas usage | 15 litres / minute |
| Gas | Any inert gas (often nitrogen) |
| Gas intake nozzle diameter | 6.35mm (1/4″) |
| Needle position | Variable to suit Techne Dri-Blocks |
| Dimensions L x W x H (mm) | 295 x 240 x 530 |
| Shipping weight (gas chamber and stand)² | 5kg |
Note : Please mention the product “SOM CODE” while making request for quotation and send it to *****@somatco.com
