Vacuum Pump

The VACUU·SELECT complete controller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run pre-defined applications at the touch of a button, or create your own application with simple drag-and-drop editing. The controller is available as a benchtop unit, ready for mounting on lab scaffolding, or as a built-in version for lab casework.

→ supplied complete and ready for use, including integrated valve and common hose connections
→ predefined vacuum applications and automatic boiling point detection saves time
→ simple setup – connect VACUU·SELECT in-line between pump and vacuum application
→ integrated vent valve allows inert gas connection
→ integrated check valve minimizes interaction with other applications on the same vacuum supply

CHEMISTRY HYBRID PUMP RC 6^New
Company : Vacuubrand Germany

The RC 6 chemistry-HYBRID pump is a combination of a two-stage rotary vane pump and a two-stage chemistry diaphragm pump for optimized corrosion resistance. The diaphragm pump maintains the oil reservoir under vacuum in order to keep the partial pressures of solvent vapors at levels below their condensation points and to reduce largely the concentration of oxygen and corrosive gases. Therefore the RC 6 chemistry-HYBRID pump has a much higher solvent vapor pumping capability and resistance to aggressive gases than conventional rotary vane pumps.

ROTARY VANE PUMP^New
Company : Vacuubrand Germany

CHEMISTRY DIAPHRAM PUMP
COMPANY : VACCUBRAND GERMANY

Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet even challenging requirements. The three-stage design provides the advantageous combination of high pumping speed and very low ultimate vacuum. All parts of the MD 4C NT in contact with pumped media are made of chemically resistant fluoroplastics.

→ outstanding chemical resistance and superior vapor tolerance
→ exceptionally high performance even at low vacuum
→ excellent ultimate vacuum even with gas ballast
→ whisper quiet and very low vibration
→ long diaphragm life, maintenance-free drive system

DIAPHRAM VACUUM PUMP
COMPANY : VACCUBRAND GERMANY

CHEMISTRY VACUUM SYSTEM
COMPANY : VACUUBRAND, GERMANY

PART NUM: 683150+674091
COMPANY : VACUUBRAND, GERMANY

VACUUM CONTROLLER CVC 2 II 230V /50-60 HZ CEE MAINS CABLE IN LINE ISOLATION VALVE VV 6C EM 24V PVDF/FLUOROPLASTICS ,AUTOMATIC

The VACUUBRAND CVC 2″ is a fully electronic vacuum gauge and controller (two set point control) for absolute pressure determination with built-in piezoresistive pressure transducer (975 – 1 Torr / 1300 – 1 mbar) and continuous variable independent setting of two switch points between 1060 and 1 mbar (~ < 795 – 1 Torr). Combined analogue and digital read out provide quick information. The CVC 2″ is also a part of the chemistry vacuum system PC500 – PC600.

SOM CODE : D366/5
COMPANY : ASTELL U.K.

SMALL VACCUM PUMP V6-GRD (PMP020) WITH BATTERY (PLC954)

CALIBRATION CYLINDERS^New
COMPANY : FLOMOTION SYSTEM U.S.A

Sigmamotor Calibration Cylinders will enhance your feed systems by allowing verification of the flow rate of the feed pump.
→ CNC machined ends
→ Clear tube for easy GPH reading
→ Sealed top
→ Quick-off top for cleaning (optional)
→ Loose top (optional)
→ NSF-61 Approved materials

VACUSAFE Vacuum Aspiration System
COMPANY : VWR USA

The VACUSAFE™ Aspiration System combines vacuum pump, collection bottle, overflow protection, and filter into an all-in-one liquid aspiration system. This closed aspiration system offers the most effective combination of containment of hazardous liquids and maximum personal protection.

VACUUM PUMP PRESSURE
COMPANY : COLEPARMER, U.S.A

SOM CODE : D215/2 + D275/3
MODEL : 79610-06
COMPANY : COLEPARMER, U.S.A

Vacuum Pressure Pump 230V

→ Free-air capacity : 0.5 cfm
→ Wetted parts : ABS plastic, EPDM
→ Dimensions : 5″L x 5 1/2″W x 4 1/2″H
→ Power : 230 VAC, 0.04 A
→ Connection : 3/8″ hose barb

VACUUM PUMP
COMPANY : LABCONCO, U.S.A

MANUAL PUMPS FOR PRESSURE SYSTEM
COMPANY : MUNSTER SIMS, IRELAND

Chemical Diaphragm Pump.
→ Oil free chemical diaphragm pump, suction capacity 2.4 m3/h, attainable final pressure 15 mbar.
→ Material contacting the products are chemical inert.
→ Quick amortisation when used instead of water jet pumps.
→ Compact, low-noised and with a long service life.
→ Fast amortization if used instead of water jet pumps

→ Simple to operate—just fill the tank and turn on the pump
→ Circulating pump continuously forces water across a set of venturies—operation is quiet, clean and efficient.

Pump features two metal venturi aspiration jets to create the vacuum with a built-in check valve to prevent back-flow of water into the system. Tank features a drain port and spigot for easy water changes. Order the optional vacuum gauge and regulator to monitor and control vacuum level.

Specification
→ Max vacuum : 29.5″ Hg (10 torr)
→ Free-air capacity : 0.6 cfm (18 L/min)
→ Port size : 8 mm hose barb
→ Wetted parts : Nickel coated brass, polypropylene, silicone and stainless steel
→ Dimensions : 13″W x 16″H x 11″D
→ Tank size : 9.5L
→ Amps : 0.35A
→ Power : 230 VAC
→ Product Type : Aspirator pump

Optimized Performance:
→ Aspiration matches digestion phases and sample number
→ Eliminates the problem of unreliable water supply
→ Up to 35 liters/minute airflow pumping speed
→ Selectable performance mode related to samples

Specification :
→ Maximum air flow: 35 l/min
→ Flow regulation: from 0 to 35 l/min
→ Residual pressure with water temperature of 15°C: 35 mm Hg
→ Power: 160 W
→ Weight: 8,4 Kg (18.5 lb)
→ Dimensions (WxHxD): 250x400x370 mm (9.8×15.7×14.6 in)

Recirculating water vacuum pump that allows the suction capacity to be selected. Use of common water pumps is frequently prevented by a lack of adequate water mains pressure or by its high consumption.

The unit consists of a high chemical corrosion-resistant ABS structure and a tank where the water introduced is recirculated continuously, offering considerable savings on water. The type and quality of the materials used make the instrument extremely quiet and long-lasting, and guarantee a high flow rate (up to 22 l/min). Special technical devices such as the cock for emptying the tank and two convenient handles for handling help the laboratory technician during use.

The unit is designed for all those applications where non-pulsing suction is needed; typical examples may be rotary evaporators, vacuum filtrations, (SPE), etc.

Features
→ Material : High Impact Polystyene.
→ Light, portable hand operated vacuum pump, attains a vacuum of 625 mm Hg(25″).
→ Pumping rate is 15 ml per stroke.
→ Built in vacuum release valve.
→ Can be used as pressure pump by transferring release valve cap to vacuum port.
→ Nozzle fit standard 6mm i.d tubing.

COMPANY : VWR, U.S.A

SOM CODE	MODEL	DESCRIPTION	CATALOGUE
D416/12	54908-008	PUMP VACCUM PRESSURE 4.5CFM 1/4HP

VACUUM PRESSURE PUMP 1/4HP115V

This product may be an accessory for Lubricated Rotary Vane Vacuum/Pressure Pump, Gast and may differ from the image shown. If you have any concerns, please contact us prior to placing your order. Product Information:

VACUUM PRESSURE PUMP 1/4HP115V – Lubricated Rotary Vane Vacuum/Pressure Pump, Gast – Model 54908-008 : This pump is readily mounted and produces steady, quiet, pulseless air delivery. Ideal for intermittent service alternately. The pump rotor is mounted on the motor shaft. Composition vanes take up their own wear automatically.

SOM CODE : D194/11
MODEL : 54970-505.
COMPANY : VWR, U.S.A.

Standard Model Vacuum Pump of 115V /220V 60Hz.
Pump features is rated at 28 L/min, accepts 3/8″ I.D. tubing, provides vacuums up to 0.1 Torr, and runs cool(55 +50C) over a wide operating range (0.1 to 760 Torr). Its compact size takes up little bench space. It light weight allows easy transport. The pumping mechanism consists of generator gears.

SOM CODE : 1462/520
MODEL : CE-FILTKIT
COMPANY : HOME SCIENCES TOOL,U.S.A.

FILTERING KIT FOR EDUCATION

This special kit allows you to more quickly separate suspensions and mixtures using vacuum filtration.
Everything you need is included: a 500 ml vacuum filtering flask, a hand vacuum pump, a 2-piece plastic 90 mm Buchner funnel with approximate 300 ml capacity, 9 cm filter paper, connection tubing, and a rubber stopper. The stopper hole is specially cut to hold the Buchner funnel.

The hand pump greatly simplifies the process of vacuum filtration, eliminating the need for a water source and vacuum aspirator. It is also much more economical than a costly electric vacuum pump. You get great vacuum filtering results with this kit!

SOM CODE : 3256/3
MODEL : P-438E.
COMPANY : ARIHANT, INDIA.

→ Vacuum Pump Rotary 1 H.P 300 Ltr/min 0.02 mm/hg.
→ Single stage pumps are known for their compact design, reliability and efficient performance.
→ Designed to achieve maximum vacuum in a short time. Gives trouble free performance for years.
→ These pumps are V-belt driven and suitable for use with common electric motors.

Details :
H.P : 1
Displacement : 300 Ltr/Min.
Vacuum : 0.02 mm/Hg.

SOM CODE : D171/1
MODEL : EF20924A
COMPANY : CREDIBLE, PAKISTAN.

Diaphragm Vacuum/Pressure Pump 115V With Service Kit EF20924C

Features
→ compact, economic design
→ high conductance, low leakage rate
→ gas-tight against atmosphere in both positions
→ helium leak-tested
→ easy to grip, lever-operated, with position indicator

SOM CODE : 1894/25
MODEL : 07530-25
COMPANY : COLEPARMER

AIR PUMP CADET SINGLE HEAD 0.8CMF 12VDC.

→ low vapor pressure even at high temperatures
→ excellent lubricating properties
→ low oil back streaming
→ excellent resistance to aging
→ resistant to break-down
→ minimum oxidation

Note : Please mention the product “SOM CODE” while making request for quotation and send it to *****@somatco.com