Heat and Thermodynamic Instruments

Heat and Thermodynamic Instruments
→ Ammeter-Voltmeter
→ Battery Charger
→ Concave Convex Lenses
→ Capacitors Condenser
→ Constantan Resistance
→ Cords
→ Energy and Environment
→ Galvanometer-Dynamometers
→ Guinea & Feather Tube
→ Heat and Thermodynamic Instruments
→ Lab Materials
→ Mathematical Pendulum
→ Metronome
→ Power Supplies
→ Quincke’s Interference Tube
→ Rulers
→ Stands Clamps and Accessories
→ Steel Balls
→ Student Experiments
→ Trolley’s
→ Waves and Sound

Immersion circulation thermostat for setting the temperature of a bath or external apparatus with non-flammable liquids at temperatures up to 95°C. The fully electronic continuous regulator and the powerful circulating pump ensure that the water in the bath is optimally stirred so that the temperature remains highly constant.

→ Operating-temperature range: 25°C – 85°C
→ Temperature constancy: ±0.05°C
→ Heating power: 1.5 kW
→ Pump pressure: max. 0.2 bar
→ Delivery rate: max. 15 l/min
→ Bath volume: max. 5.5 l
→ Bath area / depth: approx. 145×161/150 mm³

Equipment set for investigating the heat conducting capabilities of metals in complete safety. The equipment set consists of an electronically regulated heat source for warming up a heat conducting rod, an insulating sleeve to reduce loss of heat to the surroundings and improve the linearity of the temperature profile, plus cooling baffles which can be used to radiate heat away from the apparatus. With a voltmeter and ammeter connected, it is possible to determine the electric power supplied to achieve the heating.

Calorimeter body for the heat equivalent device for determining the specific heat capacity of copper. With borehole for holding temperature sensor and with integrated heating element.
Electric heater power: 10 V, 1 A
Heating element connection: via 2-mm sockets
Dimensions: approx. 50 mm x 48 mm dia.
Weight: approx. 750 g

Apparatus for determining experimentally the relationship between gas volume and pressure at constant temperature (Boyle’Ÿs law). The working cylinder is made of transparent acrylic and has a moving piston, scale and manometer. Along with a valve to let in gas or release it.

→ Length: 300 mm
→ Internal diameter: 40 mm
→ Piston: 30 mm x 40 mm diameter
→ Piston sealing: 2 ring gaskets
→ Manometer diameter: 100 mm
→ Permitted pressure: max. 4 bar

SOM CODE : D368/4
MODEL : PH20320
COMPANY : SHIV DIAL

CONVECTION OF HEAT IN AIR APPARATUS.

To show the convection of heat in air. Metal box, 230 x 75 x 75 mm, with sliding glass front and two detachable glass chimneys. Supplied without candles.

Double walled copper cylinder 34 x 6 cm mounted on steam boiler. Fitted with thermometer, draining tube and glass manometer with rubber bungs.

For the determination of the upper fixed points of thermometers andboiling points at barometric pressures other than atmospheric. Double walled copper cylinder 34 x 6 cm height x outer dia. mounted on steam boiler. Fitted with thermometer tubulure at the top, side outlet draining tube and glass manometer mounted in tubulure with rubber bungs.

SOM CODE : 1675/7
MODEL : P460
COMPANY : EISCO INDIA

STEAM HEATER

Cylindrical copper vessel 180 x 115 mm with filling tube, steam vent and vertical tube. Sliding fit Brass tube for thermometer. Cylindrical copper vessel 180 x 115 mm height x diameter, with filling tube, steam vent and vertical tube terminating the chute passing through side of vessel. Brass tube, a sliding fit in the central tube to carry thermometer. Lower end cut at an angle to seal the chute.

Note : Please mention the product “SOM CODE” while making request for quotation and send it to *****@somatco.com