D14/4_2104

D14/4_2104

Water Distiller

Double Distillers 2102 – 2108 are produced of a material combination of stainless steel / glass, without storage tank. Operating fully automatic, they produce two, four or eight litres of distillate per hour, depending on the model.

SOM CODE:D14/4
MODEL :2104
COMPANY: GFL, GERMANY

Description

Product Description

GFL Water Stills are the result of experience for decades and technical advancement. They produce highly pure, poor in gas, bacteria and pyrogen free distillate with very low conductivity. It complies with DAB regulations and with international pharmacopeia requirements.

All GFL Water Stills work economical due to the distillation of heated cooling water, they are reliable, maintenance-free, easy to operate and to service and bear the CE mark. All units are suitable for desktop and wall mounting.

GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too.

  • Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting.
  • Very good distillate quality; conductivity: single distillate: approx. 2.2 µs/cm at 25 °C, double distillate: approx. 1.6 µs/cm at 25 °C.
  • Electronic level control during the whole distilling process.
  • Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator 1st stage, the red pilot lamp “Clean” will glow.
  • Double-action low water cut-off through float switch and thermostatic safety switch.
  • Economical energy consumption by distillation of the heated cooling water.
  • Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.
  • Condenser (cooler): 1st stage made of stainless steel; 2nd stage including the baffle made of DURAN® Borosilicate glass 3.3.
  • Evaporator easily accessible for cleaning purposes .
  • Distillate withdrawal: valve made of Borosilicate glass 3.3 with “PTFE” plunger for single distillate, outlet with dust guarde shield made of Borosilicate glass 3.3 for double distillate.
  • CO2 degassing through outlet in the condenser.
  • Heating element and evaporator made of stainless steel.
  • Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin.
  • Water supply through a built-in solenoid valve with connection for pressure hose 1/2″ (inner ø approx. 12.7 mm).
  • Main switch with pilot lamp for the monitoring of both distillation stages at the front of the unit.
  • Cooling water outlet with hose connection 3/4″ (ø approx. 19.0 mm).
  • Hoses for water in- and outlet are available as accessory.
Power: 4 l/h
Storage tank – tank: without
Water treatment type: water still for double distillation
Shipping weight: 54,00 Kg
Product weight: 27,50 Kg
Dimensions: × × cm

SPECIFICATION

Capacity 4 l / h
Conductivity Single distillate: approx. 2.2 µs / cm at 25 °C,
Double distillate: approx. 1.6 µs / cm at 25 °C *
Cooling water required approx. 120 l / h
Minimum water pressure 3 bar to max. 7 bar
Exterior dimensions (W x D x H) 550 x 280 x 570 mm
Electrical connection 400 V / 50…60 Hz / 6.5, 3 Ph/N/PE three-phase current (other voltages on request)
Net weight approx. 23.0 kgs
Gross weight (cardboard box) approx. 35.0 kgs
Gross weight (wooden case) approx. 45.0 kgs
Packing volume approx. 0.34 m3

Technical Specification

Contact Us

+966-556111951 info@somatco.com

Visit Our Showroom

Find our Showroom/Branch Offices which is near to you

Reviews

There are no reviews yet.

Be the first to review “D14/4_2104”

Your email address will not be published. Required fields are marked *

Go to Top