D394/2_ 3010FC/C

Description

DESCRPTION

The Feed Controller provides introduces coarse sample material into the Cyclone Sample Mill. A 30 to 40 gram sample is poured into the hopper and is immediately conveyed (by a rotating screw) into the mill. Larger quantities (several pounds) may be handled by using a poly bag in place of the regular sample bottle. A 1″ diameter screw is driven by a constant speed gearmotor. The switch has both a forward and reverse rotation control and a neutral or “off” position. Feed rate is 3 grams per second. The Feed Controller is designed to fit on all UDY Mills. It can be mounted or removed readily without tools.

Net wt: 3.3 lbs, Ship wt: 5 lbs, Ship dims: 10″ (L) x 10″ (W) x 6″ (H).

Parts

3010FC/B: Sample Feed Controller 13RPM 115V 60Hz
3010FC/C: Sample Feed Controller 42RPM 220V 50Hz
3010FCS/B: Sample Feed Controller 52RPM 115V 60Hz

Mark-T Dust Collector Cabinet
Designed to confine dust internally and lower noise level. The MARK-T has a special compartment for the UDY Grinder that is lined with a full inch of sound abatement foam on all external walls and top. The foam reduces the high frequency sound waves caused by the grinding process. There are two access doors. The top door allows the operator to feed the grinder. The other allows the operator to remove the sample bottles more easily.

MARK-T Dims. 18½” H x 29½” W x 16½” D. Ship wt. 75 lbs.

Udy Cyclone Sample Mills
The Udy Mill is designed for rapid uniform grinding of a wide variety of feeds, grains, fertilizers, etc., with complete recovery of sample.

The air flow provides self-cleaning action and minimum temperature rise.

Cross contamination and clean-out between samples are essentially eliminated.

Accessories included: 3 collection bottles with snap cap, 2 hex wrenches, antistatic solution, 0.5 mm and 1.0mm screens and clean-out brushes. Also available is a forage cover, which permits feeding forages, leaves and wood chip samples directly into the mill without preliminary grinding